Disposal - FMS ExMGZ100/200.ATEX Mode D'emploi

Manual CSA 80001248
to the manufacturer for testing.
Fuses must not be replaced by the operator as
the affected Zener diodes also have to be
replaced at the same time. These tasks require
adjustment, and this can only be carried out in
the manufacturer's works.
6.1 Fault elimination
Changes must not be made to apparatus oper-
ated in connection with hazardous areas.
Repairs to apparatus shall only be carried out by
specially trained and authorized specialists. Nor-
mally faulty apparatus shall be returned to the
manufacturer.
7.

Disposal

Any packaging and used parts shall be disposed
of in accordance with the regulations that apply
in the country in which the apparatus is installed.
Edition February 2020
Copyright
13
thuba Ltd., CH-4002 Basel
Switzerland