JVC DLA-HD550 Manuel D'instructions page 35

Input Signal > Over Scan
Over Scan
18
Selects whether or not to set over scan for the SD video signal.
On
Off
●
This setting is not available when HD signal or PC signal is input.
Input Signal > Mask
19 Mask
Masks (Hides) the outer area of the projected image.
2.5%
5%
Off
●
Masking is available only when high definition images are input.
Input Signal > Film Mode
Film Mode
20
Selects this to view movies shot on film.
Auto
Film
Off
●
Only 480i/576i/1080i may be selected.
●
Select "Auto" or "Off" if it begins to function improperly. Particularly, with video it does not operate properly.
Over scan the top, left, bottom and right at 2.5% each.
Do not over scan.
Mask 2.5% of the screen.
Mask 5% of the screen.
No masking.
After determining if the picture is 24 frame film or 60 frames (50 frames) video,
changes the setting to the optimal progressive conversion.
Corrects unnatural movement of material pulldown processed from 24 frames to 60
frames (50 frames) and returned to 24 frames.
Sets the appropriate progressive conversion for video.
ENGLISH
35