Battery Replacement - hager TG 500A Guide D'installation

Battery replacement

A. If the optional opening of the detector is not locked
(See section on Fixing):
- Take the detector off its mounting base by turning
it counter clockwise until the unlock click is heard.
- Replace the worn battery.
- Lock the detector back onto its base.
- Carry out a test (See section on Test of detector).
B. If the optional opening of the detector is locked (see
Fixing):
- Insert a flat blade screwdriver into this notch.
- Take the detector off its mounting base by turning
it counter clockwise until the unlock click is heard.
- Replace the worn battery.
- Lock the detector back onto its base.
- Carry out a test (See section on Test of detector).
Waranty
A warranty period of 24 months is offered on hager products, from date of manufacture, relating to any material or manu-
facturing defect. If any product is found to be defective it must be returned via the installer and supplier (wholesaler).
The warranty is withdrawn if:
- after inspection by hager quality control dept the device is found to have been installed in a manner which is contrary to
IEE wiring regulations and accepted practice within the industry at the time of installation.
- the procedure for the return of goods has not been followed.
Explanation of defect must be included when returning goods.
It is mandatory
to replace the
battery initially
supplied with an
alkaline battery
of the same type
(9 V, 6LR61).
Dispose of worn batteries
according to local waste
disposal regulations.
In case of any works
in the room
Painting the detector is
prohibited.
Protect the detector by covering
it fully with the plastic cover
supplied, prior to carrying out
any work in the room after
detector's installation.
The operation of the smoke
detector is not possible in
partnership with a sprinkler
device.
34