hager TG 500A Guide D'installation page 26

Contents
Presentation
- Operation principle
- Description
Power supply
Installation of the detector
- Selection of the
installation l ocation
- Fixing
- Installing several detectors
in a network
Testing the detector
Manual disabling
of the detector
Indication of faults
- Power supply fault
- Indication of detection
head clogging
Maintenance
- Detection head maintenance
- Battery replacement
- In case of works
User sheet
Technical characteristics
TG 500A (white)
TG 500B (silver)
26
26
TG 501A (white)
27
28
Presentation
28
Operation principle
28
This optical smoke detector is intended for the
29
protection of private apartments in buildings, or
homes, mobile homes and motor homes.
30
It can be: - Used as a standalone unit, or
31
32
32
In the event of smoke detection:
32
33
33
33
34
34
35 - 36
37
26
- Inter-connected in a wired network of up to
40 detectors.
Detector at the
source of the smoke
detection signal
The unit flashes quickly
An emergency
light is turned on
A built-in alarm
is activated on a
continuous basis
(85 dB(A) from 3m)
Other detectors
with wired
inter-connection
-
An emergency
light is turned on
A modulated
built-in audible alarm is
activated
(85 dB(A) from 3m)