Publicité
Please read this OWNER'S MANUAL thoroughly to familiarize yourself with each control and function. We at
ALPINE hope that your new MRP-F320/MRP-F200/MRP-T130 will give you many years of listening enjoyment.
In case of problems when installing your MRP-F320/MRP-F200/MRP-T130, please contact your authorized
ALPINE dealer.
CAUTION: These controls are for tuning your system. Please consult your authorized Dealer for adjust-
ment.
•
Perform the installation at a location that is level. Make sure the parking brake is on and the
ignition is OFF.
•
Always disconnect the cable from the (–) negative pole of the battery before connecting or
disconnecting the MRP-F320/MRP-F200/MRP-T130. This will prevent the possibility of short
circuits.
•
When replacing a blown fuse make sure to replace it with one of the same value.
•
Be sure to connect the color coded leads according to the diagram. Incorrect connections may
cause the unit to malfunction or damage to the vehicle's electrical system.
•
Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right
channel speaker cables to each other or to the vehicle body.
•
This unit is designed for 12 VDC, negative ground systems. Make sure that your vehicle has this
type of electrical system before connecting the power cable.
•
When making connections to the car's electrical system, be aware of the factory installed
components (e.g. on-board computer). Do not tap into these leads to provide power for this unit.
When connecting the MRP-F320/MRP-F200/MRP-T130 to the fuse box, make sure the fuse for the
intended circuit of the MRP-F320/MRP-F200/MRP-T130 has the appropriate amperage. Failure to
do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE
dealer.
•
The MRP-F320/MRP-F200/MRP-T130 uses female RCA-type jacks for connection to other units
(e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so,
please contact your authorized ALPINE dealer for assistance.
•
Due to the high power output of the MRP-F320/MRP-F200/MRP-T130, it is important that all
connections are clean and well secured, or damage could result.
•
When installation and connections are completed, check the followings: a) Connections are
proper. b) Operation of brake lamps, horn etc. are proper with the ignition ON. c) Operation of
audio units is proper with the switch ON.
SERVICE CARE
IMPORTANT NOTICE
This Amplifier has been type tested and found to
comply with the limits for a Class B computing device
in accordance with the specifications in Subpart J of
Part 15 of FCC Rules. This equipment generates and
uses radio frequency energy, and it must be installed
and used properly in accordance with the manufactur-
er's instructions.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
ENGLISH
PRECAUTIONS
Please record the serial number of your unit in the
space provided here and keep it as a permanent
record. The serial number plate is located on the
rear of the unit.
IMPORTANT
Publicité
