Samsung BD-P1400 Manuel D'utilisation page 40

Movie Frame (24 Fs)
Movies are usually fi lmed at 24 frames per second. Some Blu-
ray Discs have the capability of playing back at this frame rate.
Setting the Movie Frame (24Fs) feature to ON allows you to
adjust the Blu-ray player's HDMI output to 24 frames per
second for improved picture quality.
You can enjoy the Movie Fame (24Fs) feature solely on a TV
supporting this frame rate.
This menu can only be selected in 1080i or 1080p HDMI
output resolution modes.
Depending on the disc, two types of source may be included: Movie material (24 frame) and Video
material (30 frame). When the source switches between Movie and Video, the screen may blink for a few
seconds.
Resolution
Sets the output resolution of the Component and HDMI video signal.
•
The number in 480i, 480p, 720p, 1080p and 1080i indicates
the number of lines of video. The i and p indicate interlace
and progressive scan, respectively.
- 1080p : Outputs 1080 lines of progressive video.
- 1080i : Outputs 1080 lines of interlaced video.
- 720p : Outputs 720 lines of progressive video.
- 480p : Outputs 480 lines progressive video.
- 480i : Outputs 480 lines of interlaced video.
If the connected TV does not support the movie frame or the
selected resolution, you will see the following message:
If you select Yes and the resolution is not supported, the TV's
screen will be blank.
M

If the screen is blank, press and hold the $ button on the front of the player for more than 5 seconds
(no disc inserted). All settings are restored to the factory default. Follow the steps on the previous page to
access each mode and select the Display Setup that your TV will support.
Language Setup
Photo Audio Setup TV Aspect
Setup Display Setup Movie Frame (24 Fs)
No Disc No Disc
HDMI Setup Resolution
Parental Setup Screen Message
System Upgrade Front Display
TV Aspect
Language Setup
Photo Audio Setup Movie Frame (24 Fs)
Display Setup Resolution
Setup
No Disc No Disc
HDMI Setup Screen Message
Parental Setup Front Display
System Upgrade
TV Aspect
Language Setup
Movie Frame (24 Fs)
Photo Audio Setup
Display Setup Resolution
Setup
No Disc No Disc
If no pictures are shown after the selection,
please wait for 15 seconds. And then,
HDMI Setup Screen Message
!
the resolution will be reverted
Parental Setup Front Display
to the previous value automatically.
Would you like to make a selection? System Upgrade
Yes No
English _39
: 16:9 Wide
: Off On
Off
: 480p
: On
: Automatic
: 16:9 Wide
: Off
: 480p
1080p
1080i
: On
720p
: Automatic
480p
480i
: 16:9 Wide
: Off
: 480p
1080p
1080i
: On
720p
: Automatic
480p
480i