Samsung BD-P1400 Manuel D'utilisation page 23

connections
CONNECTING TO A TV WITH DVI CABLE
1. Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player
to the DVI IN terminal of your TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray Disc
Player to the AUDIO (red and white) IN terminals of your TV.
Turn on the Blu-ray Disc Player and TV.
3. Press the input selector on your TV remote control until the DVI signal from the Blu-ray Disc Player appears on
your TV screen.
•
If you have set the remote control to properly operate with your TV (see pages 18~19), press the TV INPUT
SEL. button on the remote control and select HDMI as the external source of the TV.
Connecting the HDMI cable while the Blu-ray player's power is on, the player's video output will automatically
change to HDMI mode (see page 40).
M

Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user's manual of your TV.

If an HDMI or HDMI-DVI cable is plugged into TV, the Blu-ray Disc Player's output is set to HDMI/DVI
automatically within 10 seconds.

If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 40)

When you connect the player to the TV using the HDMI cable for the fi rst time or to a new TV, the HDMI output
resolution will be automatically set to the highest provided by the TV

If the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG fi le, the player will stop
playing.
22_ connections
Audio Cable
HDMI-DVI cable
(not included)
Red White