Samsung BD-P1400 Manuel D'utilisation page 36

SETTING UP THE AUDIO OPTIONS
Allows you to set up the Audio device and sound status depending on the audio system being used with the player.
1. With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Setup, then press the
2.
ENTER or ► button.
Press the ▲▼ buttons to select Audio Setup, then press
3.
the ENTER or ► button.
Press the ▲▼ buttons to select the desired audio option from the options described below, then
4.
press the ENTER or ► button.
Press the ▲▼ buttons to select the desired item, then press the ENTER button.
5.
M

Press the RETURN or ◄ button to return to the previous menu.
Press the MENU button to exit the menu.
Digital Output
•
PCM : Select this when your equipment does not decode
Dolby Digital.
•
Bitstream : Outputs Dolby Digital or DTS audio as
Bitstream. Select this when your AV receiver or AV amplifi er
has a Dolby Digital or DTS Decoder.
M

If you have selected a LPCM sound track on a disc, the output will automatically be set to PCM.

Be sure to select the correct Digital Output or you will hear no sound or a loud noise.

When playing a Dolby Digital movie make sure the Digital Output is set to Bitstream.

If the HDMI device (Receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), The audio
signal outputs as PCM.
Photo Language Setup
Setup Audio Setup
No Disc No Disc
Display Setup
HDMI Setup
Parental Setup
System Upgrade
Language Setup
Photo
Audio Setup Digital Output
Setup
No Disc No Disc
Display Setup PCM Down Sampling : On
HDMI Setup Dynamic Compression : On
Parental Setup Speaker Setup
System Upgrade
Photo Language Setup
Setup Audio Setup Digital Output
No Disc No Disc
Display Setup PCM Down Sampling : On
HDMI Setup Dynamic Compression : On
Parental Setup Speaker Setup
System Upgrade
English _35
: PCM
: PCM
PCM
Bitstream