IMPORTANT INSTRUCTIONS FOR USE
• To minimise the risk of gas build-up in the cell, you must ensure there is
sufficient water flow through the cell when the unit is on and producing
chlorine.
• It is essential that your pool pump circulates sufficient water through the cell to
completely fill the cell with water during the chlorination process. The minimum
flow rate through the cell is 3.5m
• Periodically check the paddle of the safety flow switch to ensure it is free to
move back and forth.
Flow switch O N .
Flow switch O FF.
Page 7 of 18
3
/ hr.
Flow
Flow
ü
Diagram A
CORRECT
OPERATION
WITH PUMP
RUNNING
û
Diagram B
INCORRECT
OPERATION
WITH PUMP
RUNNING
P/N 403185