Terraillon TPRO5400 Mode D'emploi page 20

WEIGHING WITH BMI FUNCTION AND USER MEMORY
1. Press the [MODE/HOLD] key once, after two control screens, the symbol BMI appears on the display screen:
WEIGHT HEIGHT BMI >0< NET STA
Screen 1
Press [ / Tare Height]
2. Wait until the scales display «STEP».
3. Step onto the scales.
NB: If you wish to use ID numbers for each user, refer to the setup section.
If you have activated the ID mode, the screen displays «- - - -», enter a 4-digit ID then press key
[ / Tare Height] to confirm..
a - For models without electronic height meter
Input the height with the number keys.
b - For models with electronic height meter
• Check that the meter has been returned to its starting position before measuring height.
NB: If the height meter has not been returned to its starting position before use, the LCD screen displays
«InIt».
Return the height meter to its starting position.
• Extend the height meter and adjust it to the person's height. The person's height will be displayed on the screen.
The user can also press key [▲/Print-CE] to input data via a keypad rather than using height meter data.
c - Validation of the height and recording of user's personal data
If you do not wish to store the user's data
If you wish to store the user's personal data
20
NOT TPRO5400.indd 20
EN
ELECTRONIC MEDICAL SCALE CLASSE III
HOLD
CM
%
Kg
lb
Screen 2
[
Screen 3
/ Tare Height].
09/02/12 14:49