Télécharger Imprimer la page

EINHELL Bavaria BBS 720 Instructions De Service page 6

Masquer les pouces Voir aussi pour BBS 720:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Anleitung BBS 720 SPK 1 neu
GB
USE
The belt grinder/sander can be used to sand wood
and to grind iron, plastic and similar materials when
fitted with the correct grinding/sanding belt.
Layout
1
grinding/sanding plate
2
On/Off switch
3
locking button
4
additional handle
5
dust bag
6
connection for dust bag
7
clamping lever for grinding/sanding belt
8
grinding/sanding belt adjustment screw
Please read the directions for use carefully and
pay particular attention to the safety instructions.
Keep these operating instructions together with
the belt grinder/sander.
Technical data
Voltage
230 V~ 50 Hz
Power rating
Grinding/sanding belt dimensions
76 x 457 mm
Belt speed
200 m/min
Totally insulated
Sound pressure level LPA
Sound power level LWA
Vibration a w
<2.5 m/s
Weight
Items supplied
BBS 720
Dust bag
1x grinding/sanding belt
Important!
For health reasons it is essential to use the dust
bag!
Fitting the dust bag
Dust is drawn from directly above the
grinding/sanding belt into the dust bag
6
11.02.2003
6:54 Uhr
General safety instructions
Pull out the power plug before commencing any
work on the machine (cleaning the machine,
changing the grinding/sanding paper, etc.)!
For your own health, use a dust mask and
goggles on all grinding/sanding jobs!
Harmful/toxic dust (e.g. lead-based coatings,
some species of wood, metal) may arise during
grinding/sanding.
Make sure that the workpiece is adequately
secured against slipping.
In you own interest, keep the machine clean at
all times and examine it after use for signs of
damage.
Always keep your belt grinder/sander clean.
Do not use caustic agents to clean the plastic
parts.
It is recommended to wear ear muffs when using
a belt grinder/sander.
Noise
The level of noise at the workplace may exceed 85
dB(A). In this case, noise protection measures are
720 W
required for the user.
Operating tips
85 dB(A)
Allow the belt grinder/sander to run up to speed
98 dB(A)
before you place it against the workpiece.
Do not switch off the belt grinder/sander while
2
the belt is still touching the workpiece.
3.08 kg
Always hold the belt grinder/sander with both
hands during operation.
Always sand wood in the direction of the grain.
Seite 6

Publicité

loading