Electrical Connection - WIKA RSM Mode D'emploi

3. Assembly / 4. Electrical connection
GB

4. Electrical connection

The electrical connection is made according to the wiring diagram
printed on the switch.
(Models with only one normally closed or normally open contact
contain no wiring diagram.)
The cable bushing (2) in the connection enclosure (1) must be sealed.
6
WIKA Operating instructions Magnetic operated float switches Model RSM and HIF
When mounted inside ferromagnetic surroundings the
function could be restrained. This may cause a malfunction
and harm to goods.
The magnetic operated float switch must be mounted
outside ferromagnetic surroundings.
When mounted inside ferromagnetic surroundings the
function could be restrained. This may cause a malfunction
and harm to goods.
The magnetic operated float switch must be mounted
outside ferromagnetic surroundings.