Care And Cleaning - Technibel Climatisation SPA 250 X5 TA Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Air Intake and outlet side
(Indoor Unit)
CAUTION
Air filter
NOTE
How to remove the filter
CAUTION
Air intake
grille

Care and Cleaning

1. For safety, be sure to turn the air conditioner off and also to
disconnect the power before cleaning.
2. Do not pour water on the indoor unit to clean it. This will damage
the internal components and cause an electric shock hazard.
Clean the air intake and outlet side of the indoor unit with a vacuum
cleaner brush, or wipe them with a clean soft cloth.
If these parts are stained, use a clean cloth moistened with a mild liquid
detergent. When cleaning the air outlet side, be careful not to force the
vanes out of place.
1. Never use solvents or harsh chemicals when cleaning the indoor
unit. Do not wipe plastic parts using very hot water.
2. Some metal edges and the fins are sharp and may cause injury if
handled improperly; be especially careful when you clean these
parts.
3. The internal coil and other components of the outdoor unit must
be cleaned every year. Consult your dealer or service center.
The air filter collects dust and other particles from the air and should be
cleaned about once every six months (4-way-cassette type) or two
weeks (ceiling mounted type). If the filter gets blocked, the efficiency of
the air conditioner drops greatly.
The frequency with which the filter should be cleaned depends on the
environment in which the unit is used.
4-way cassette type:
1. Remove the bolt screw on each side out of the latch using a
screwdriver. (After cleaning, be sure to reattach the two bolt screws.)
2. Press on the two latches of the air intake grille with your thumbs in
the direction of the arrow to open the grille.
3. Open the air intake grille downward.
When cleaning the air filter, never remove the safety chain. If it is
necessary to remove it for servicing and maintenance inside, be sure
to reinstall the safety chain securely (hook on the grille side) after the
work.
4. Remove the air filter attached to the air intake grille.
Latch
Bolt screw
Safety chain
Air filter
19

Publicité

Table des Matières
loading

Table des Matières