nedis BTTR400BK Mode D'emploi page 7

5
A
into an audio source with a double 3.5 mm audio jack
output.
4
4
Flip up A
3.5 mm jack output.
Switching on the product
• Press and hold the multifunction button A
to switch on the product.
4
Press and hold A
product.
4
The product automatically switches off when it is not paired
within 5 minutes.
Pairing the product to Bluetooth® device
1. Switch on the product to activate pairing mode.
2. Enable Bluetooth on the device you want to pair.
3
4
A
blinks blue to indicate the product is in pairing mode.
3
4 A
lights up blue when pairing is successful.
Disconnecting the paired connection
2
1. Press A
2
2. Press A
Cleaning the pairing memory
• Double press A
mode.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product
BTTR400BK from our brand Nedis
tested according to all relevant CE standards and regulations
and that all tests have been passed successfully. This includes,
but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety
datasheet if applicable) can be found and downloaded via
webshop.nedis.com/BTTR400BK#support
For additional information regarding the compliance, contact
the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
5
to plug A
2
again for 3 seconds to switch off the
to disconnect from the paired device.
again to enter pairing mode.
2
to clear paired devices and enter pairing
into an audio source with a single
, produced in China, has been
®
7
2
for 3 seconds