Installing The Battery Indicator - Dometic WAECO PerfectCharge BI 01 Instructions De Montage Et De Service

PerfectCharge BI01
6

Installing the battery indicator

When selecting the installation location for the battery indicator, observe the
following information:
 The device must be installed in a located protected from moisture.
 The device may not be installed in areas containing flammable materials.
 The device may not be installed in dusty environments.
 The place of installation must be well ventilated. A ventilation system must
be available for installations in small, enclosed spaces.
 The device must be installed on a level and sufficiently sturdy surface.
Attach the battery indicator as follows (fig. 3, page 4):
➤ Attach the adapter (1):
– to a wall
– at a suitable location in the vehicle (e.g. in the cockpit or the driver's
cabin)
– or to the wall bracket for a PerfectCharge battery charger
➤ Slide the battery indicator (2) into the adapter (1).
Connect the battery indicator as follows (fig. 4, page 4):
A
NOTICE!
Make sure you do not reverse the polarity.
 Positive battery terminal: red terminal
 Negative battery terminal: black terminal
Incorrect polarity can damage the battery indicator.
➤ Insert the plug of the preferred connection cable into the socket (1) of the
battery indicator:
– Connection cable with the cable lugs (2) (included in the scope of
delivery)
– Connection cable with the 12 V plug (3) (included in the scope of
delivery of the battery charger)
– Connection cable with the battery terminals (4) (included in the scope
of delivery of the battery charger)
EN
Installing the battery indicator
25