Operating The Device Safely - Dometic WAECO PerfectCharge IU812 Instructions De Montage

Safety instructions
NOTICE!
A
 Use ductwork or cable ducts if it is necessary to lay
cables through metal panels or other panels with
sharp edges.
 Do not lay the 230 V mains cable and the 12 V DC
cable in the same duct.
 Do not lay the cable so that it is loose or heavily
kinked.
 Fasten the cables securely.
 Do not pull on the cables.
2.3

Operating the device safely

DANGER! Danger of electrocution
D
 Do not touch exposed cables with your bare hands.
This applies especially when operating the device
from the AC mains.
 To be able to disconnect the device quickly from the
mains, the socket must be close to the device and be
easily accessible.
CAUTION!
!
 Do not operate the device
– In salty, wet or damp environments
– In the vicinity of corrosive fumes
– In the vicinity of combustible materials
– In areas where there is a danger of explosions.
 Before starting the device, ensure that the power
supply line and the plug are dry.
 Always disconnect the power supply when working
on the device.
 Please observe that parts of the device may still con-
duct voltage even if the fuse has blown.
22
PerfectCharge IU812
EN