Publicité
Les langues disponibles
Les langues disponibles
Additional safety warnings
Wear safety goggles.
► Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property
damage or may cause an electric shock.
► When working screed, use dust extraction.
The vacuum cleaner must be approved for the
extraction of stone dust.
Using this equipment reduces dust-related hazards.
► When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
The power tool is guided with both hands.
► Never use the machine with a damaged cable.
Do not touch the damaged cable and pull the
mains plug when the cable is damaged while
working.
Damaged cables increase the risk of an electric
shock.
03/2015
Einscheibenschleifmaschine Spider, 230V,
Noise/vibration information
Measured values determined according to EN 60745
The A-rated sound pressure level
of the machine is normally
Sound pressure level ................dB(A)
Sound power level......................dB(A)
Margin of error ...........................K =
Warnung
Overall vibration values
(vector sum of three directions)
determined in accordance with EN 60745:
Vibration emission level ............ah =
Margin of error ...........................K =
The vibration emission level indicated in this
information sheet has been measured in accordance
with a standardised test specified in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the
main applications of the tool.
However if the tool is used for different applications,
with different accessories or poorly maintained, the
vibration emission may differ.
This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job.
This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration include: main
taining the tool and the accessories, keeping hands
warm, organisation of work patterns.
#78319
Wear hearing protection!
85,7
96,7
dB +/- 1.5 dB
2
2,7 m/s
2
+/- 1,5 m/s
19
Publicité
