Meec tools 015385 Mode D'emploi page 26

EN
• Do not use damaged or modified
batteries, or power tools that are
damaged. Damaged or modified batteries
can behave unexpectedly and cause a fire,
explosion or risk of personal injury.
• Do not expose batteries or power tools to
naked flames or heat. Batteries can
explode when exposed to naked flames or
temperatures higher than 130°C.
• Follow the instructions for charging and
charge the battery only at the
temperature indicated in the instructions.
Incorrect charging or charging outside the
given temperature range can damage the
battery and cause a fire.
SERVICE
• Power tools must only be serviced by
qualified personnel using identical spare
parts. This will ensure that the power tool
remains safe to use.
• Never attempt to repair damaged
batteries. The battery must only be
serviced by the manufacturer or at an
authorised service centre.
SPECIAL SAFETY INSTRUCTIONS
FOR DRILL DRIVERS AND IMPACT
WRENCHES
Hold the tool by the insulated grips when
working in areas where it could come into
contact with concealed cables or its own power
cord. Contact with a live cable will cause the
metal parts on the power tool to also become
live – risk of electric shock.
Symbols
The following symbols can be of importance
for how you should use your power tool. Make
sure you understand the symbols and their
significance.
26
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Impact wrench
Battery voltage
Torque
Speed, no load
Stroke rate
Tool brackets
Sound pressure level, LpA
Sound power level, LwA
Vibration
Weight
Battery (art. no: 012182)
Voltage
Capacity
Charger (art. no: 015649)
Rated voltage
Nominal output
Nominal output voltage
Nominal output current
Overload protection tripping current
Safety class
Charging time (4 Ah)
Always wear ear protection.
The declared values for vibration and noise, which
have been measured according to a standardised
18 VDC
350 Nm
0 – 2000 rpm
0 – 3000 spm
1/2"
85 dB(A), K=3 dB
96 dB(A), K=3 dB
20.3 m/s², K=1.5 m/s²
kg
18 VDC
4 Ah
230 V ~ 50 Hz
70 W
20 V
2.4 A
8 A
II
100 min