Eschenbach TVi Color Mode D'emploi page 12

Color and switch it on again while keeping the brightness button
pressed in. The TVi remembers this setting.
Factory Default Settings
If the TVi Color doesn't respond the way you expect it to, or if you
are unhappy with the current settings, the TVi can be reset to the
default factory settings by switching it off and switching it on again
while keeping the mode button pressed in.
Reading with your TVi Color
Your TVi Color is easy to use, and with a short amount of practice
you should become proficient in its use. Remember, when reading,
look at the television, not at the paper or the mouse, as the
magnified image appears on the television.
Put the full weight of your hand on the mouse. This will reduce
fatigue and will give you more control over the mouse's movement.
Find the start of the text and slide the mouse smoothly across the
line of text. You may have to make slight adjustments to keep the
line of text on the screen as you move across. At the end of the
line, move the mouse back to the beginning of the line and move it
downwards slightly. You can now read the second line.
If you move the mouse or the paper, it is easy to lose your place
in the text. The mouse has an overview mode that makes it easier
to orientate your position on the page: rotate the scroll-zoom
wheel fully back - lift the mouse a little and look at the page from
a distance. When you have found the place you want to read, put
the mouse down and rotate the scroll-zoom back to the desired
magnification.
Writing with your TVi Color
The mouse has handwriting
stands that can be pulled out that
allow you to write with the aid of
the camera. Flip out one of the
stands: use the left-hand-side
stand if you are right handed and
vice versa.
- 12 -