Gram GEC Série Manuel D'utilisation page 10

message ACC, the data will be automatically stored.
2. Remove the weight from the weighing pan and place another one on
the pan. Input the unit weight and press the M+ key. When the balance
makes a beep and the display shows the message ACC, the data will
be automatically stored.
l If after each operation, the weight is not removed from the pan,
pressing the M+ key the balance will make a long beep and it can
not save the data of following weighing.
l The balance can store until 180 weighings.
Total weighing accumulations MR
1. In weighing mode, press the MR key, the display WEIGHT will remain
at zero. The display PIECE WEIGHT will show
display PCS the total number of pieces.
2. The display WEIGHT will show the total weight accumulated. The
number located in superior side of message ACC means the number
of weighing made.
3. Press again the MR key to exit from function without delete data.
(When the option CAL 1: MR REC is configurated to exit) or press
again the MR key to exit and delete data.
4. If optional Printer LP-50 is connected to the balance, the total weight
accumulated and the total of pieces will be printed (When the option
CAL 1: MR REC is configurated to delete)
9
and the