Ribimex 159cc Manuel D'instructions Et D'utilisation page 16

4.2- Assembly
Hopper installation
• Carefully lift the hoppper (1), then place and align the hopper on top of the hopper seat.
• Secure the hopper with bolts and washers provided. (see Fig. 2a)
Wheel installation
• Lift the machine a little, and reeve the wheel with the wheel axle.
• Reeve a washer, then insert a cotter pin to fix. (see Fig. 2b)
• Repeat above steps to install another wheel.
Moving the machine
• Stand at the back of the machine.
• Grab the hopper handle (9), then step on the wheel axle.
• Pull the handle and tilt the machine backward, then it is ready to move.
• Do not tow the machine over a long distance or on open road.
V. OPERATION
5.1- Intended use
• The product is intended for outdoor domestic use in private gardens.
• The product is suitable for shredding garden debris such as clippings and small twigs within
the specification (see Table 1).
• The product is NOT suitable for shredding other materials such as plastic, paper, glass,
metal, fabric... etc.
• Do not use the product for artisanal, industrial, professional and / or commercial
applications (e.g. in construction sites, public parks, forest...).
• Do not use the product for unintended applications.
5.2- Before starting engine
Before starting engine, you should check below.
Fig. 2a Fig. 2b
Page 16 / 32