Publicité
Les langues disponibles
Les langues disponibles
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
• Do not override or interrupt or modify any protective and safety devices of the machine.
• Never operate or leave the machine in damp environments (such as raining or high
humidity).
• Never leave the product running unattended.
• Verifications before use
-
Check the integrity of the machine and signs of damage.
-
Ensure all screws, bolts and knobs are tightened
-
Ensure protective and safety devices are properly assembled and in good condition
-
Check engine oil and fuel levels
-
Check air filter
• WARNING!
Debris could travel outward at a high speed. Stand clear of the discharge chute.
3.3- Special warnings when using the product
• Operate the equipment on a firm, level and non-slippy surface and under proper lighting.
• Only use the product outdoors or in a well-ventilated area. Never start or run the engine in
an enclosed area. The exhaust emissions may contain toxic carbon monoxide (CO), which
may cause serious or fatal injury.
• Plan your work and allow plenty of time for rest.
• When feeding material into this equipment, be extreme careful that metal, rocks, bottles,
cans or other foreign objects are not included.
• If the machine strikes a foreign object or if it starts making an unusual noise or vibration,
immediately stop the engine and allow the machine to come to a complete stop.
• Never use hands or any part of body to unclog foreign objects or obstacles.
• Do not allow an accummulation of processed material to build up in the discharge area,
which may result in kick-back from the discharge chute.
• The engine silencer and cylinder become hot amd can cause a burn. Do not touch.
• Do not attempt to shred materials that is larger than specified in this manual. Personal injury
or damage to the machine could result.
IV. GETTING STARTED
WARNING! Heavy Object
Unpacking and assembly by 2 people are recommended.
4.1- Unpacking
• Remove the product from carton and discard all packaging properly.
• Check if the product and accessories (if any) are intact.
• If any parts are missing or damaged, do not assemble or operate the machine until the
part has been replaced or the fault has been rectified.
Page 15 / 32
Publicité
