Ribimex 159cc Manuel D'instructions Et D'utilisation page 13

EN –
Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
II. CHARACTERISTICS
III. SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in fire and/or serious
injury.
WARNING!
To reduce the risk of injury, read the instruction manual and understand the
machine before use.
WARNING!
When using power tools, basic safety precautions should always be followed to
reduce the risk of fire and personal injury.
Save all warnings and instructions for future reference.
Keep this manual handy so that you may refer to it later whenever any questions arise. Always be
sure to include this manual when selling, lending, or otherwise transferring the ownership of this
product.
Symbols (Explanation of symbols appearing on the tool, if applicable).
Caution! Risk of injury and/or damage and/or deterioration of product in case of
non-compliance to safety requirements
CE Conformity
Prevent accidents
Danger! Keep all parts of your body away from moving parts and from the shredder
hopper and discharge chute.
Protect your hands
Rotating cutting knife. Keep hands and all body parts away from the openings while
the machine is running.
Do not place any tools or objects or part of your body in the hopper while the
machine is running.
Keep persons (esp. children) and animals away from product and working area.
Projection hazard (e.g. small debris).
Keep bystanders at a safe distance (at least 3m) away from the tool while in
operation.
Wear eye and hearing protection.
Wear a mask.
Wear protective gloves.
Wear protective shoes with non-slippery sole.
CAUTION! Fire hazard
Do not smoke or approach an open flame while using the machine or when filling
the tank with oil or gasoline.
Never start the machine near flames or sparks.
Oil / gasoline is flammable and may explode.
III. Safety instructions
IV. Getting Started
See Fig. 1
See Table 1
V. Operation
VI. Maintenance and Storage
Page 13 / 32