Kemper MINI-TRESOR Instructions D'installation Et D'utilisation page 13

EN 3
1.
Screw the socket combination (5) (already wired) onto the mounting
plate (6), connect in the built-in wall cabinet (1) and attach to the
cabinet wall using the wing-screws (7) (20° swivel).
Note!
Carry out a functional check.
Danger!
Electrical work must be carried out only by authorised
specialist personnel!
Installation of socket
combination
Installation of frost-proof outer
4
fitting and spray protection
Warning!
Installation must be carried out by qualified plumbers!
Note!
- Push the wall plate on to the outlet housing as far as the stop
and adjust using the screw.
- Fit the hose sleeve and adapter as illustrated
© www.kemper-olpe.de – 11.2021 / K410021000001-00 – 13 /36