For these installations it is highly advised to modify the depression offset, according to the number of pipe
sections installed. See the following chart:
Gas
outlet pipe sections
≤ 3m
4m
> 4m
* Check modification over the offset with the stove working on level 1 and 9 during 1 hour , controllong the
right combustión of the stove ( no smoke, no depressure excess, etc).
4.31. Air inlet connected directly to the outside.
Air intake tube.
Combustion air intake from the outside.
Gas output >2m.
Windbreak.
Stainless steel hose clamp.
It is highly recommended to place a grid in the intake pipe to allow the free air circulation and avoid the
entrance of unwanted objects or little animals like birds.
A Ecoforest box is placed inside the fireplace. It contains the user manual, the installation and maintenance
manual, a keyboard and keyboard support, a WiFi antenna, a power cable, a room sensor and a cleaning brush. On
the Basic models, the keyboard must be mounted with its holder.
Keyboard. (Basic model).
Keyboard support. (Basic model).
Conexión de la sonda de ambiente.
Conexión de corriente ~230/240V - 50Hz.
Offset adjustment
"Depression" (PA)*
+ 5.0
+ 8.0
+8.0 ≥ Adjustment ≤ +14.0
POWER CABLE, ROOM SENSOR AND WiFi ANTENNA CONNECTION.
34
Drawing 14
Drawing 15
Drawing 16