S+S Regeltechnik KINASGARD DBWF Notice D'utilisation page 6

G
®
KINASGARD DBWF ⁄ DBWF - C
The ceiling-built-in motion sensor and presence detector KINASGARD
a switching contact as an output. It is used for monitoring and detecting statuses and for motion-dependent control of room functions, e.g. for lowering
the temperature of unused rooms. The ceiling motion sensor is used for installation in suspended ceilings in corridors, offices, as well as in residential
and business facilities. The connecting head is pluggable for quick, easy mounting. The measuring transducer is accommodated in a separate enclosure.
The sensor detects motions over an aperture angle of 110° and a perimeter of 360°. The patented lens system with 20 individual lenses results in only
very small dark areas that are only a few centimetres wide even at a distance of 10 m, thereby reliably detecting small movements.
TECHNICAL DATA
Power supply:
Power consumption:
Sensor:
Detection range:
Motion detection:
After-running time:
Ambient temperature:
Connecting head:
Connecting cable:
Electrical connection:
Mounting (sensor):
Protection type (sensor):
Protection class (sensor):
Standards:
DBWF measuring transducer
Output:
Enclosure:
Enclosure dimensions:
Cable gland:
Protection type (enclosure):
DBWF-C measuring transducer
Output:
Enclosure:
Enclosure dimensions:
Protection type (enclosure):
®
KINASGARD DBWF – Ceiling built-in motion sensor
KINASGARD ® DBWF - C – Ceiling built-in motion sensor, compact form
Type ⁄ WG01
DBWF
D B W F -W
DBWF-C
D B W F - C
24 V AC (± 20 %); 15...36 V DC
< 1 W at 24 V DC; < 2 VA at 24 V AC
infra-red motion sensor
perimeter 360°, aperture angle 90° ⁄ 110°,
reach approx. 10 m, circular, at an installation height of approx. 3 m
the sensor covers a detection radius (r) of approx. 3.4 m
of persons and objects, necessary temperature difference between subject and surroundings ≥ 5 K
adjustable from 4 seconds to 16 minutes
–10...+50 °C
plastic, material polycarbonate (PC), colour white, pluggable
PVC, LiY Y, 4 x 0.14 mm²,
K L = approx. 2 m (other lengths optional)
0.14 - 1.5 mm² via terminal screws
in the suspended ceiling, ceiling cutout Ø = 30 mm, cover Ø = < 35 mm
IP 30 (according to EN 60 529)
III (according to EN 60 730)
CE-conformity, electromagnetic compatibility
according to EN 61 326, EMC Directive 2014 ⁄ 30 ⁄ EU
potential-free changeover contact (24 V), 1 A ohmic load
plastic, UV-stabilised, material polyamide, 30 % glass-globe reinforced,
with quick-locking screws (slotted ⁄ Phillips head combination),
colour traffic white (similar to RAL 9016)
72 x 64 x 37.8 mm (Tyr 1)
M 16 x 1.5; including strain relief, exchangeable,
max. inner diameter 10.4 mm
IP 65 (according to EN 60 529)
potential-free normally open contact, signal relay, max. 24 V ⁄ 0.5 A
plastic, material PVC, colour black
55 x 20 x 15 mm (compact form)
IP 20 (according to EN 60 529)
Detection
Presence + Movement
Yes ⁄ No (relay on ⁄ off)
Yes ⁄ No (relay on ⁄ off)
® DBWF ⁄ DBWF-C detects the presence of persons and movements and has
Output
Presence + Movement
Changeover contact
Normally open contact
Rev. 2018 - V21 GB
Item no.
1401-6120-300 0-000
1401-6130-100 0-006