Doro HandleEasy 328gsm Mode D'emploi page 23

Ring setup
Selecting ring signal
1. Press w . The phone book numbers will be
displayed.
2. Press w again. Stored SMS messages will be
displayed. If no messages are stored, phone
book numbers are displayed.
3. Press and hold w for 2 seconds. The ring
signals will be displayed.
4. Scroll between ring signals with
5. Press w to select a signal.
6. Press
Adjusting ring volume
1. In standby mode, press and hold
seconds.
2. Press
Vibrator
Press and hold
signalling mode:
to end.
L
/ to adjust the ring volume.
} {
for 2 seconds to change the
#
Ring only
Vibrator only
Ring and vibrator
English

/ .
{ }
for 2
}