Commissioning; Procedures In The Event Of Faults - Calira C2 Mode D'emploi

%
! "

Commissioning

The Module C2 is in operation as soon as connections are made and the main
switch is actuated.

Procedures in the event of faults

Fault Action
The fresh water Actuate the main switch. Check the connection and the
tank display is not cable to the fresh water tank as well as the connection and
functioning. cable to Module B.
The voltage Actuate the main switch. Check the connection and cable
display is not to Module B.
functioning.
The charging Check the connection and cable for Module B.
control display is
not functioning.
The main switch is Check the connection and the cable to Module B as well
not reacting. as the fuse and connections to Module A and B. See also
operating instructions for Module B.
None of the faults Please contact the manufacturer:
described here Trautmann GmbH & Co. KG
seems to apply. CALIRA-Apparatebau
But the device still Lerchenfeldstr. 9
does not work. D-87600 Kaufbeuren
Internet: www.calira.de
e-mail: info@calira.de
16
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: +49 (0)8341 9764-0 Fax: +49 (0)8341 67806
# ! $