American Dynamics Illustra 625 PTZ Mode D'emploi page 13

3 Align the indoor housing assembly with the dome as seen in Figure 2.
When aligning the indoor housing with the dome ensure that the cutout on the collar
allows the safety lanyard screw to be accessed.
4 Maintaining upward pressure slide the indoor housing assembly over the dome to secure
as seen in Figure 3. A positive click will be heard when the indoor housing assembly has
fully engaged.
Ensure that the safety lanyard does not become trapped between the dome and the collar of the
indoor housing assembly.
English Illustra 625 PTZ Indoor Housing Assembly
Figure 2
Figure 3
1-3