dirna Bergstrom bycool COMPACT ADR Instructions De Montage page 27

COMPACT
To place the front (at the previous mentioned)
11
spigots with (1) washer M6 wide wing and
(1) nut M6 in each spigot. To tight nuts til the
rubber ducting til run into the upper rubber
of the unit.
IMPORTANT: The rubber ducting must
being run into the upper rubber of the
unit to avoid air leaks.
11
EPDM
Gasket
Cabin roof
Upholstey
Tighten nut mentioned under point 10a until
12
it touches upper surface of front.
12
EPDM
Gasket
Cabin roof
Upholstey
Place console and centre equipment in
13
the most convenient place of cabin roof.
Once centred, remove console for later
installation.
Unit base
Nut M6
Stud M6
Unit base
Nut M6 (10a)
Nut M6
Stud M6
Air conditioning for vehicles
Rubber ductings
Rubber ductings
27
Foam Gasket
front with louvers
Foam Gasket
front with louvers
EN