attika RAIS VISIO 1 Mode D'emploi page 198

Rebuilding to a self-closing door before, the oven is built in.
The door is made self-closing by dismantling some of the door's counterweights. On the VISIO 1
& 3, the counterweights must be changed on both sides.
68 68
1. Remove the transport lock and the screws on the coun-
terweight cover
Transport lock.
2. Remove the counterweight cover by pulling it up.
Counterweight cover.
3. Remove the retaining ring (Allen key 2.5mm). Remove
the required number of counterweights, so that the door
closes slowly and at a constant speed. Check its operation.
Counterweights
Retaining ring
4. Tighten the retaining ring (Allen key 2.5mm).
Retaining ring
5. Attach the counterweight cover and screw in the
screw(s).
Counterweight cover.