Inserting & Changing Needle - Singer MADAME 2 Manuel D'instructions

EN
Inserting & Changing Needles
Change the needle regularly, especially if it is showing signs
of wear and causing problems. For best sewing results
®
always use SINGER Brand Needles.
Insert the needle as illustrated as follows:
A. Loosen the needle clamp screw and tighten again after
inserting the new needle. (1)
B. The flat side of the shaft should be towards the back.
C/D.Insert the needle as far up as it will go.
Attention:
Turn power switch to off ("O") before inserting or removing
the needle.
Needles must be in perfect condition. (2)
Problems can occur with:
A. Bent needles
B. Damaged points
C. Blunt needles
1
B
2
56
D
A
B
C
A C