Nosiboo Pro Guide De Démarrage Rapide page 8

INSTRUCTIONS FOR USE & SETTINGS
1
Select the correct suction power.
Setting recommendations:
min. setting for newborns;
*
middle setting for babies;
*
max. setting for small children
*
and preschoolers.
2
Turn on the device by
pushing the control
button and wait
5 seconds.
CLEANING
Remove the connecting
*
tube and the nose tip,
then take apart the
Colibri housing.
4
Insert the clean, dry nose tip into
the child's nostril.
Move the nose tip around
*
gently to make sure that you
get all areas of the nostril.
The effective and strong (max) suction power
has been proven safe for nasal aspiration by ENT
doctors.
If the mucus is thin, you can use the device at a
lower setting. If it is thick you can use the device
at a higher setting than normal.
3
Hold your child in a stable position.
Aspirate the nose of infants after laying them into a
*
stable position and hold their head during the process.
You may also sit them in an infant bouncer or infant seat.
*
If the child is already able to sit, sit them in your lap.
*
In this case, do not lay the child on their back during the
aspiration.
5
Wash the parts with
*
liquid soap and
lukewarm water.
Switch off the device with the control
button after use, but don't unplug
the device from the electrical outlet
until it is completely shut down (min.
5 seconds).
You can soak the
*
parts in a disinfection
liquid, just make sure
the liquid is safe to
use for baby
equipment.