Selecting The Operating Mode; Boost Feature - RADSON PTC BLOWER 950W Notice D'utilisation

EN

SELECTING THE OPERATING MODE

The button allows you to adapt the
operating schedule of your device to your
needs, depending on the season, whether
your home is occupied or not.
By pressing the button once or several
times, select the required mode.
Mode sequence:
Auto Comfort
Mode overview
• Auto Mode
In Automatic Mode, the device will auto-
matically change from Comfort mode to
Eco mode according to the established pro-
gramme.
3 different cases depending on your set-up:
1 7 day and daily programme
Your device has been programmed and is executing Comfort and Eco mode
orders in line with the settings and time periods you have selected
and daily programme integrated" chapter page
2 Programming by pilot wire
If you do not want to use the programming feature.
The device equipped with occupancy detector is delivered by default with the
self-learning mode enabled.
Without occupancy detector, your device's default setting is non-stop Comfort
for 7 days a week.
In both cases, meaning you do not have to change any settings. Orders sent
by the pilot wire will only be applied in Auto mode, thus your device will
automatically receive and apply the programmed orders sent by your power
manager or your time switches (see "Information
about remote control by pilot wire" chapter page
3
Without programme
On the version without occupancy detector, if the 7 day and daily programme is
not enabled or no orders are being sent by pilot wire, then your device's factory
settings mean that it will operate in non-stop Comfort mode, 7 days of the
week.
• Comfort mode
Non-stop Comfort mode. The device will
operate 24 hours a day to achieve the tem-
perature which has been set (e.g. 19°C). The
Comfort mode temperature level can be set
by the user (see page 6).
• Eco mode
Eco, which means the Comfort Mode tem-
perature minus 3.5°C. This enables you
to lower the temperature without having
to reset the Comfort Mode temperature.
Select this mode for short-term absences
(between 2 and 24h )
and during the night.
• Frost protection mode
This mode enables you to protect your home
against the effects of cold weather (frozen
pipes, etc.), by maintaining a minimum
temperature of 7°C in it at all times. Select
this mode when you will be away from your
home for a long time (more than 5 days).
Restoring factory settings
See page 21.
M16MI328 A04_02/18 R
Eco Frost protection
Display
3
(see "7 day
6).
10).

BOOST FEATURE

Important:
the Boost mode can be enabled at any time, whatever the
current operating mode (Auto, Comfort, Eco or Frost protection).
To activate Boost mode, press
be set at maximum for the time period you request. 60 minutes display
will flash by default.
Comment: if the heating indicator is switched on, the blower switches
on and heats the room in addition to the heat emitted by the device.
- First press : Boost.
During the first minute: the boost symbol and the heating indicator
appear and the duration count flash.
During the first minute, you can modify the Boost duration from 0 to
the maximal authorised duration of the Boost, such as defined during
the advanced settings (see page 14 for more details)
minutes (or more quickly by push superior to 2 seconds) by pressing
and . This modification will be saved and effective for the
next Boost.
After 1 minute, the Boost count begins and the time is running, minute
by minute.
Comment: After 1 minute, you can modify temporarily the duration: it
will be valid only for this active Boost and therefore non-recurring.
The Boost can stop for 3 different reasons:
- An order "Stop" has been sent by your energy manager through the
pilot wire:
The blower stops, -- appears. The cursor moves above auto. When the
order Comfort will be sent, the blower will be restarted until the count
end.
FILT
- appears on the display:
The blower continues to operate but does not heat up. Check if nothing is
put in front of the ventilation grid to not block the air flow. The filter could
be plug by dust, it must be cleaned
, the desired temperature setting will
by intervals of 5
(see page 21).
4