Kensington Pro Fit Guide D'instructions page 3

2. Plug the USB connector of the wireless receiver into an active USB port on your computer. On a
Windows computer, the computer will display a Found New Hardware wizard the first time you
plug in the receiver.
The keyboard and mouse work within about 10 meters (30 feet) of the receiver. If the keyboard
or mouse is not working properly:
• Make sure that there are no obstructions between the device and the receiver.
• Try plugging the receiver into a different USB port on your computer.
3. Your desktop set should be automatically paired and ready to use.
If the receiver is not automatically connected when the desktop set is removed from the box,
or if the connection is lost at any time, push the connect button on the receiver. The button will
blink for 30 seconds. Anytime during these 30 seconds, press the conect button on either the
keyboard or mouse to establish a connection. Your desktop set is now ready for use.
4
About the Battery
• Battery life for your Pro Fit 2.4 GHz Wireless Mouse is 4-6 months based on average use.
• Your mouse includes an optional battery saving feature. To preserve battery life when not using
the mouse for long periods of time, slide the switch to off.
OFF / ON
• Erratic mouse or keyboard behavior may indicate low battery power. Replace the batteries to
solve this issue.
• Always replace the batteries in sets, using the same age and brand of batteries. Always dispose
of batteries properly.
The Media Buttons
These buttons let you quickly access functions when you are using a media player on your computer.
The buttons may not work with all media players.
Media buttons
Mute Press to mute the sound.
Stop Press to stop the media player.
Play/Pause Press to play or pause the media player.
Next Press to skip to the next track.
Previous Press to skip to the previous track.
5