English - Milwaukee HOBL 7000 Notice Originale

TECHNICAL DATA
Lamp
Volts
Mains frequency
Power input
max. Terminal Block Ampacity
Weight with power cord
Weight without cable
Luminous ux
Colour rendering index
Colour temperature
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY WARNINGS LAMP
The light has to be installed and maintained by a quali ed
specialist.
Electric installations may only be completed complying with the
national and provincial safety regulations.
For the connection, a VDE-certi ed connection line (at least
H07RN-F 3G1,0) must be used.
LED lights are extremely bright. Please never look directly into the
light.
Make sure that the xing point capacity is more than 3 times of the
light weight.
SPECIFIED CONDITIONS OF USE
Luminaire for use in Rooms or parts of buildings for temporary use.
Do not use this product in any other way as stated for normal use.
ASSEMBLY AND CONNECTION TO POWER SUPPLY
Before the installation, always switch o the voltage
supply!
Lead the connection line through the intended cable
entry.
Connect the cables to the screw terminal according page 4 (N
= blue cable, = green/yellow cable, L1 = brown cable).
(Tightening torque 1,8Nm)
Several lamps can be connected together.
Please observe the following limits.
Fuse maximum number of lamps
230 V
10A
16A
110 V
10A
16A
MAINTENANCE
HOBL 7000
110-240 V
person in order to avoid a hazard. The light source contained in this
50-60 Hz
luminaire shall only be replaced by the manufacturer or his service
70 W
agent or a similar quali ed person.
30 A
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
3,8 kg
please contact one of our Milwaukee service agents (see our list of
3,2kg
guarantee/service addresses).
7700 lm
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on
70
the label and order the drawing at your local service agents or
4000 K
directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.
SYMBOLS
25
43
10
18
If the external exible cable or cord of this luminaire is
damaged, it shall be exclusively replaced by the
manufacturer or his service agent or similar quali ed
CAUTION! WARNING! DANGER!
Please read the instructions carefully before starting
the machine.
Do not stare at operating lamp.
This tool is only suitable for indoor use. Never expose
tool to rain.
Always disconnect the plug from the socket before
carrying out any work on the machine.
Caution! Risk of electric shock
<Do not dispose of electric tools together with
household waste material.Electric tools and electronic
equipment that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility. Check
with your local authority or retailer for recycling advice
and collection point.
European Conformity Mark
UkrSEPRO Conformity Mark
EurAsian Conformity Mark
GB

English

9