Telescopic Pole (Not Included) Assembly - Kokido Telsa 80 Manuel D'emploi

Align and insert all brushes into the notches on the underside of the cleaner.
Align and insert the wheels into the cavities on the underside of the cleaner.

Telescopic pole (not included) assembly

Note:
1. A V-clip is installed inside the pole connector to secure the telescopic pole in
position.
2. Make sure to assemble the handle. You need to hold it as well while putting the
pool vacuum into pool water or lifting it out of the pool.
Press the button of the V-clip to retract the side tabs and then slide the telescopic pole
onto the pole until the side holes of the telescopic pole match the side tabs. Release
the V-clip button and the telescope pole is secured to the pole connector.
To release the telescopic pole, press the V-clip button and pull the pole away from the
cleaner.
10