English - Chauvin Arnoux C.A 403 Mode D'emploi

READ THE INSTRUCTIONS BEFORE USING THE INSTRUMENT
Put the instrument in a perfectly stable position (horizontal or at an angle on its fold-away
stand).
Check that the needle is correctly set to the zero mark (adjustment screw at the centre
of the instrument).
Make sure that the leads are connected in accordance with the polarity of the instrument.
If the needle swings to maximum deflection against the stop, cut-off the supply to the
circuit immediately.
A range is correctly selected only if the switch is placed exactly on this range.
Replace the fuse with one of the same value and type.
Clean the case with a soft cloth without solvant.
S
ummary
PRESENTATION ............................................................................................ 8
SPECIFICATIONS ........................................................................................... 8
REPLACING THE FUSE ................................................................................. 11
MEASUREMENTS .......................................................................................... 11
TO ORDER ..................................................................................................... 13

ENGLISH

SAFETY PRECAUTIONS
page
7