Wayscral TAKEAWAY E-50 Notice D'utilisation page 46

The bicycle must be properly maintained according to the instructions
in this user guide.
WARNING: As for any mechanical component, a power-
assisted bicycle is subject to high stress and will wear out.
The different materials and components can react
differently to wear or ageing. If the expected service life of
a component has been exceeded, it may suddenly break,
presenting a risk of injury to the cyclist. Cracks, scratches
and discolouration in areas subject to high stress indicate
that the component has exceeded its service life and must
be replaced.
Recommendation: safe use and safety tips:
Before using your power-assisted bicycle, make sure that it is in good
working order. Pay particular attention to the following points:
•
The riding position is comfortable.
•
Nuts, bolts, quick-release parts and components are properly
tightened.
•
The brakes are working properly.
•
The handlebar's range of movement is correct, without
excessive play and correctly attached to the stem.
•
The wheels are not blocked by anything and the bearings are
properly adjusted.
•
The wheels are correctly tightened and attached to the
frame/fork.
•
The tyres are in good condition and inflated to the correct
pressure.
•
The rims are in good condition.
•
The pedals are firmly attached to the chain set.
•
The transmission works correctly.
•
The reflectors are correctly positioned.
46
EN