Installation Instructions - Helo HAVANNA D -WT Manuel Du Produit

Installation and User Manual Havanna D Helo-WT

2.9. Installation instructions

Figure 2 Heaters installation
1. The wall mount is attached to the wall according to the mounting
dimensions.
The dimensions can be found on the following page.
2. Mounting the sauna heater onto the support brackets
3. Lift the heater on the support brackets so that the
connection box is situated on the open side in order to
allow the installation and connection of the electric cable.
If you wish to situate the connection box on the other side,
the steam guide (frame of the stone compartment) must be
turned over. The steam guide is fastened with two screws
from the inside of the stone compartment (see image). The
collar (the higher edge) of the steam guide must always be
placed closest to the wall.After mounting, tighten the
screws and ensure that the heater is securely fastened by
lifting it carefully.
7
.