Publicité
Les langues disponibles
Les langues disponibles
c) Use of device :
Elements of command and display
Command/Display
Control knob
(n°1 on picture)
Switching-on
Press the power control knob (n°1 on picture) and turn it opposite the high flame
position for a few seconds.
Use a gas lighter or a long matchstick by holding it near the burner
Keep the control knob (n°1 on picture) pressed for some more seconds and re-
lease it slowly. Your machine is warming up
Grease the plate before each cooking.
Temperature setting
Once the burner is lit; set the appliance to the desired power by turning the con-
trol knob (n°1 on picture).
It is not necessary to leave the device switched on at full power. It is necessary
to adapt the temperature to products to be cooked to limit the gas consump-
tion.
Stopping the appliance
Set control knob (n°1 on picture) to 0: the appliance is completely switched-off.
Cut the gas supply
Let the device cooling down
Clean the appliance. (See 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
6 CLEANING AND MAINTENANCE
Cut the gas supply.
- Let cool completely the device before any technical intervention or cleaning.
- Clean your crepe machine regularly after each use to avoid phenomenon of cala-
mine coming the cooking of the sugar and from some dough which accumulates very
quickly, and creates a film on the plate which harms in the quality of the cooking.
- For cleaning, only use non-abrasive products, clean regularly the external walls of
your device with warm water and wash liquid: avoid the abrasive towelling.
Function
Switches on the appliance
Controls power (low flame = low power, high flame = high power)
16
Publicité
