User manual
6.
Upgrade
6.1 Upgrade by USB / OTA
You can carry out system software upgrade through Main Menu
At present the system supports two methods to upgrade the system software: Upgrade by USB and S/W Upgrade by OTA.
6.2 Upgrade by USB
Highlight the Upgrade by USB item and then press OK
corresponding prompt will appear.
Select the partition in which rom.bin is stored, then press OK
start the USB upgrade. The interface will be as below:
When the USB Upgrade completes, the system will auto restart.
Main Menu - - - - > Setting
> Setting - - - - > Upgrade
> Upgrade. See the figure below:
Main Menu
Main Menu
> Setting
> Setting
> Upgrade
> Upgrade
OK key to enter the following USB Upgrade interface. If there is no USB device inserted,
OK
OK
OK key to enter a file list. From the file list, select rom.bin and then press OK
OK
OK
37
OK
OK key to
OK
EN