Publicité
Les langues disponibles
Les langues disponibles
User manual
If the Date Time Mode item is set as 'Auto', both the Date and Time items will be grayed (cannot be set by hand). If the Date Time Mode item is
set as 'Manual', users can set the Date and Time items by hand, but other items cannot be set.
If the Time Zone item is set as 'Auto', the Day Light Saving item will be grayed (cannot be set by hand). If the Time Zone item is set as a concrete
time zone, you can set whether or not to use the daylight saving time according to the selected time zone.
4.4.4
Through the Factory Setting item you can reset the system to factory settings.
Press CH+/
CH+/- - - - keys to highlight this item and then press OK
CH+/
CH+/
and the system will then start to reset to factory settings. When finished, the Init Install menu (see F F F F ejl! Henvisningskilde ikke fundet.
through which you can re-initialize the system.
4.4.5
The Upgrade item is for software upgrade. See chapter Fejl! Henvisningskilde ikke fundet.
4.4.6
Through the Version item you can view the version information of system hardware and software as well as the build date of the system.
See the figure below:
4.4.7
The Auto Shut Down item sets whether the system will enter the standby mode if there is no any operation for a certain time period.
If the Auto Shut Down item is set as 'On', the system will auto enter the standby mode after one, two or three hours of no operations.
Factory setting
Upgrade
Version
Auto shut down
OK key, and a password input dialog will appear. Input a correct password (default: 0000),
OK
OK
Fejl! Henvisningskilde ikke fundet. for details about software upgrade.
Fejl! Henvisningskilde ikke fundet.
Fejl! Henvisningskilde ikke fundet.
31
ejl! Henvisningskilde ikke fundet.
ejl! Henvisningskilde ikke fundet.) will show,
ejl! Henvisningskilde ikke fundet.
EN
Publicité
Chapitres
