User manual
4.5.3
The Saturation item is to adjust the saturation level of the system from 0 to 24. See the figure below:
4.5.4
The HUE item is to adjust the hue level of the system from -30 to 30. After highlighting this item, press ENTER key to enter its setting interface,
see the figure below:
4.5.5
The S/PDIF mode item is to set the output format of digital audios. After highlighting this item, press OK
figure below:
The list has three options: PCM, Bitstream and Mute.
Saturation
HUE
S/PDIF mode
33
OK key to pop out an option list, see the
OK
OK
EN