Klipsch RP-240D Mode D'emploi page 3

ENGLISH
IMPORTANT SAFETY INSTRUCTIONS!
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. ONLY USE attachments/accessories specified by the manufacturer.
10. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip over.
11. DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with
liquids, such as vases, are placed on the apparatus.
The exclamation point, within an equilateral triangle, is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle, is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
WARNING: No naked flame sources – such as candles – should be placed on the product.
C A U T I O N
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
THANK YOU
Thank you for your purchase of the Klipsch Reference Premiere Designer On-Wall
speakers! Each speaker blends versatile, superior styling with legendary Klipsch
lifelike sound for seamless integration into any décor. The RP-140D, RP-240D
and RP-640D speakers are designed to operate vertically or horizontally as left,
center, right or surround speakers while the RP-440D sound bar combines the
three front channels in one aesthetic cabinet. Each model comes with a high
quality, elegant, tempered glass base for stand, table or bookshelf placement and
keyhole mounts for on-wall placement.
PRODUCT REGISTRATION
Register your product online at www.klipsch.com/register
• Klipsch Group Inc, (KGI) will keep you up-to-date on new products and promotions
• Your personal information will never be resold
• This registration information is not used for warranty purposes.
Please retain your receipt for warranty claims.
ROOM PLACEMENT
Before You Start — Some Klipsch speakers have feet and other accessories
that may need to be installed prior to use.
Left and Right Main Channel Speakers — For the most spacious sound
KGI suggests placing the RP-140D, RP-240D or RP-640D front left/right
speakers six to 15 feet (2 to 4.5m) apart with the listening position about 1 to
1.5 times the distance separating the speakers. Excellent sound can still be
achieved by placing/wall-mounting these speakers close to both sides of your
TV if that is more aesthetically pleasing.
Center Channel Speakers — Speakers used as center channel speakers are
designed to place dialogue and primary sounds so that they appear to come
from the video screen. These speakers should therefore be placed/wall-mounted
horizontally, as close to the screen as possible, preferably at least 1" directly
below the screen. The RP-440D three-channel sound bar should also be placed/
wall-mounted this way.
Rear Surround Channel Speakers — Speakers used as surround speakers
should be placed approximately 2 feet above the listening position. Typically this
will be about 5-7 feet above the floor. The surrounds should be placed on the
walls directly adjacent to the listening position. Another option would be on the
wall behind the listening position. The final surround speaker placement depends
on your room's characteristics.
SPEAKER/SOUND BAR PEDESTAL INSTALLATION
If you place your RP-140D,RP-240D,RP-640D speakers or RP-440D sound
bar on a stand, table, etc. (vs. mounting on the wall), you will need to attach the
provided tempered glass pedestals with the included screws.
Before you attach a pedestal, have the speaker wire that will attach to that speaker
available since attaching the pedestal and connecting the speaker wire to a speaker
are done at the same time (see "Connecting" section for proper wire connection).
The RP-140D, RP-240D and RP-640D speakers can be attached vertically or
horizontally onto their pedestals and, therefore, have threaded inserts in two
different positions on the rear of these speakers. The RP-440D sound bar can
only be attached horizontally to its pedestal. Attach the pedestal as follows:
®
1. Insert speaker wires (one set for RP-140D, RP-240D and RP-640D and
three sets, left, right and center channel for RP-440D sound bar) inside hole
in pedestal back and pull through pedestal top (See Diagram 2).
2. Position speaker/sound bar on ridge on pedestal top, lining up the holes
in the top with the threaded inserts on the speaker (the RP-140D has just
one insert when in horizontal position and it should lineup with left hole on
pedestal top). (See Diagram 2)
3. Using a Phillips screwdriver, screw the screws partially into the speaker
inserts, without tightening them. (See Diagram 2)
4. If vertical mounting, attach speaker wires (see Diagram 1), adjust wires
to fit in recessed area around terminals and tighten Phillips screws on
pedestal. If horizontal mounting, route speaker wire from the rear center
of speaker through channel(s) to the speaker terminals, attach speaker
wires in same manner as vertical mounting, then tighten Phillips screws
on pedestal. With the RP-440D sound bar, use both channels to route all
three sets of wires to the speaker terminals. (See Diagram 3) (Note: using
speaker wire larger than 18 gauge on the RP-440D may not allow
wire(s) to completely fit in channels). If needed, use the included adhe-
sive strip to hold excess wire in place. To change the Klipsch logo direction
on the speaker front gently pull out one side of it and rotate 45˚.