Stihl FSE 31 Notice D'emploi page 30

English
Do not chafe on edges,
–
pointed or sharp objects
Do not squeeze through
–
gaps in doors or windows
If cords are twisted –
–
unplug the power tool and
straighten them out
Never touch the rotating
–
cutting attachment
Always unwind the
–
extension cord completely
from the cable drum to
reduce the risk of fire from
overheating.
Holding and Controlling the
Power Tool
Always hold the unit firmly
with both hands on the
handles. Make sure you
always have good balance
and secure footing.
Always hold the machine on
the right-hand side of your
body.
28
Left hand on the assist
handle, right hand on the
control handle, even if you are
left-handed.
During Operation
If the power sup-
ply cord is
damaged, immedi-
ately disconnect
the plug from the
wall outlet to avoid
the risk of electric
shock.
Avoid damage to the power
supply cord. Do not drive over
it, pinch or tug it.
Never jerk the connecting
cord to disconnect it from the
wall outlet. To unplug, grasp
the plug, not the cord.
Be sure your hands are dry
before touching the plug or
power cord.
Never spray water on the unit
– risk of short circuit!
The drive motor is
not waterproof. To
reduce the risk of a
short circuit or
electrocution,
never work with
the power tool in
the rain or in wet or
very damp
locations.
Do not leave the power tool
outdoors in the rain.
In case of imminent danger or
in an emergency, switch off
the motor immediately –
release the trigger switch and
starting lockout.
Your power tool is designed to
be operated by one person
only. Do not allow other
persons in the work area.
15m (50ft)
The cutting attachment may
catch and fling objects a great
distance and cause injury -
therefore, do not allow any
other persons within a radius
FSE 31, FSE 41