Digital Teletext (** For Uk Only); Analogue Teletext; Widescreen; Idtv Menu System - TechLine TL-22LC882 Mode D'emploi

Press the "M" button to display the main menu, highlight
the Setup and then Language menu using " " or " "
button and press the OK button to display the "Language
settings" menu.
Highlight the "Subtitle" item in "Language settings"
menu and use " or "
desired language.
If "Subtitle" is on and a language option is set, pressing
the " " button causes the following warning message
display on the screen (** for UK only):

Digital Teletext (** for UK only)

• Press the " " button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
• When Press "SELECT" button or similar message
appears on the screen, press the OK button.
• When the " " button is pressed, the TV returns to
television broadcasting.
• With digital terrestrial broadcasting (TNT), in addition
to digital teletext broadcasting together with the
normal broadcasting, there are also channels with
just digital teletext broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the "
teletext screen will be displayed.

Analogue Teletext

Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
"TELETEXT" explanations.

Widescreen

Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the "
change screen format.
When Auto is selected, the format being displayed is
determined by the picture being broadcasted.
PLEASE NOTE: Menu size changes depending on the
chosen image size.
button to set Subtitle to the
" button again, the digital
" button repeatedly to
English - 43 -
Notice !
AC3 audio type is not supported. In this case, Tv
sound will be muted. If the broadcast includes AC3
stream, the following warning message will be
displayed on the screen:
If there is no audio available, the following warning
message will be displayed on the screen:.

IDTV Menu System

Press the "M" button. Main menu will be displayed.

Channel List

Using the " " or " " button on the remote control, make
sure that the fi rst item, Channel List, is highlighted and
press the "OK" button to display the Channel List. Or you
press the OK button during watching TNT broadcasting
and get to the Channel List directly.
Navigating the Entire Channel List
Press " " or " " button for selecting the previous or next
channel. You can press "RED" or "GREEN" button to
move page up or page down.
To watch a specifi c channel, highlight it using " "
or " " button and then press "OK" button, while the
"Select" item on Channel List menu is highlighted by
using " " or " " button.