Viewing The Connections - Side Connectors; Power Connection; Aerial Connection - TechLine TL-22LC882 Mode D'emploi

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view all the
channels that you subscribe to. For more information, see "Conditional
Access" section.
2. Video Input is used for connecting video signals of external devices.
Connect the video cable between the VIDEO IN socket on the TV and the
VIDEO OUT jack on your device.
3. Audio Inputs are used for connecting audio signals of external devices.
Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device.
Also to enable PC/YPbPr sound connection in such a case, use an
appropriate audio cable between the connected device's audio outputs
and the TV's audio inputs
Note: If you connect a device to the TV via the VIDEO or PC/YPbPr
cable (YPbPr cable is not supplied) you should also connect your device
with an audio cable to the AUDIO INPUTS of the TV to enable audio.
4. Headphone jack is used for connecting an external headphone to the
system. Connect to the HEADPHONE jack to use headphones.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before
you connect the set to the mains.
• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
English - 38 -