Miele GDU 45/60-1 Notice D'installation page 28

G
^ To shorten the plinth facing:
– either trim along this line with
a saw;
or
– cut along one of the cutting lines
if it is close enough to the line
you have drawn.
Score the cutting line along the
plinth facing and then break off
the excess.
^ Screw the plinth facing back onto the
brackets, with the cutting line at the
top.
If the door still does not open smoothly
the plinth facing may need further trim-
ming.
Please refer to the Dishwasher in-
stallation diagram and the operating
instructions before connecting the
dishwasher to the electricity supply.
28