Miele GDU 45/60-1 Notice D'installation page 20

G
These instructions describe all the
steps necessary for fitting the GDU
decor set.
They should be read in conjunction with
the Dishwasher installation diagram
which has detailed instructions on
installation and fitting.
GDU decor set for building-under a
dishwasher
By using a GDU decor set, an
integrated (i) model dishwasher can be
converted into a built-under (U) model
dishwasher.
The GDU decor set consists of:
1. a front panel with inset
decor panel,
2. a plinth facing with fixing brackets.
GDU 45/60-1 and GDU 60/60-1:
These decor sets are designed for use
in kitchens with 720 mm high base units
(lower edge of the worktop to the lower
edge of the kitchen cabinet door).
GDU 65/65-1 (XXL dishwashers):
These decor sets are designed for use
in kitchens with 770 mm high base units
(lower edge of the worktop to the lower
edge of the kitchen cabinet door).
The decor panel supplied with the GDU
set can be replaced by a panel to
match your kitchen cabinetry.
20
1. Fitting the protective cover
plate and fascia panel
Fit the protective cover plate and fascia
panel as described in the "Installation
diagram for built-in dishwashers".
Make sure that you keep all
dishwasher accessories and spacer
strips that are not necessary for
fitting the GDU decor set in a safe
place for future use. These will be
required if you want to convert the
dishwasher back to an integrated
model, e.g. if you buy a new kitchen.